Videos for Fig. 15 with a small and a large laser beam diameter, respectively.
mediaposted on 19.07.2021, 07:49 authored by Chong WangChong Wang, Wojciech SuderWojciech Suder, Jialuo DingJialuo Ding, Stewart WilliamsStewart Williams
These are two supplementary videos for Fig 15, showing deposition process with two different laser beam diameters (12 mm and 2 mm, respectively) in wire based PTA-laser hybrid additive manufacture.
New Wire Additive Manufacturing (NEWAM)
Engineering and Physical Sciences Research CouncilFind out more...