4 files

Heat transfer modelling of flashlamp heating for automated tape placement of thermoplastic composites

posted on 2021-03-22, 15:37 authored by Anastasios DanezisAnastasios Danezis, David WilliamsDavid Williams, Michael Edwards, Alex SkordosAlex Skordos
Heat transfer model validation: contains the experimental temperature data captured during the manufacture of AS4/PEEK composites and the corresponding model predictions.

Irradiance profiles: contains the optical model predictions for the configuration used in the study and the data after the application of smoothing algorithm.

Thermal model 2D geo: the geometry of the heat transfer model.

Bulk profiles: contains the bulk profiles as predicted by the thermal model for the 25, 50, 100 Hz pulsed cases and continuous operation.


EPSRC Centre for Doctoral Training in Composites Manufacture ( EP/L015102/1)


Authoriser (e.g. PI/supervisor)