1/1
Data supporting 'Fibre-Coupled, Multiplexed Methane Detection Using Range Resolved Interferometry'
Version 2 2023-02-10, 15:51
Version 1 2021-01-25, 09:27
dataset
posted on 2023-02-10, 15:51 authored by James BremnerJames Bremner, Thomas KissingerThomas Kissinger, Jane HodgkinsonJane Hodgkinson, Ralph TatamRalph TatamDataset for paper:
Fig 2 & Fig3:
Time of measurement, The OPD being interrogated, The amplitude of the signal produced by the RRI system, The applied window used, The raw interferrometric signal from the photdiode
Note: The Time measurement only applies to the measurement of the interferometric signal. The RRI signal amplitude is instantaneous
Fig 4:
The extracted light intensity passing through each tube as a function of time over the period of one ramp. (arbitary units)
Fig 5 Absorption Heights:
The height of the normalised absorption curves in each test
Fig 5 Recorded Gas Flows:
The gas flow measurements in each test that were used to calculate the gas concentrations in each test
Fig 6: Allan Deviation:
The value for the Allan Deviation at each integration period
Fig 7: Cross Talk Raw Data:
The height of the normalised absorption curve measured for Tube 1 in each test.
Fig 7: Cross Talk Protocol:
The gas flow supplied to each tube during each test.
Funding
DTP 2016-2017 Cranfield University
Engineering and Physical Sciences Research Council
Find out more...Engineering Photonics: Sensor and Instrumentation Development and Application
Engineering and Physical Sciences Research Council
Find out more...