This data set
contains results from the experimental test conducted to dissolve and spin
cellulose nanofibres into filaments. The CNF was derived from paper mill sludge
by mechanical grinding and dissolved in ionic liquid at 9 and 12% CNF
concentration. Fibre pinning was conducted by dry-jet wet spinning method to
produce filaments with average tensile strength of 19 GPa and 26 GPa, and
modulus of 223 MPa and 282 MPa respectively. Enclose is the data from the
tensile tests, rheology of the spinning solution and the filament orientation
obtained from the wide angle x-ray of the filament.