[Cranfield DrivAer] CAD_Pack_8 Diffusers

Diffusers CAD Pack (35% scaled-version), including:

1. DrivAer_hp - Diffuser (side plates):

Side plates used to generate an diffuser channel for slopping angles protruding the DrivAer main body (i.e. diffA < 7 deg).

2. DrivAer_hp - Diffuser (diffA00 plain):

Diffuser pack with a plain, sloping surface of 0 deg (i.e. 'no-diffuser' case).

3. DrivAer_hp - Diffuser (diffA05 plain):

Diffuser pack with a plain, sloping surface of 5 deg.

4. DrivAer_hp - Diffuser (diffA10 plain):

Diffuser pack with a plain, sloping surface of 10 deg.

5. DrivAer_hp - Diffuser (diffA16 plain):

Diffuser pack with a plain, sloping surface of 16 deg.

6. DrivAer_hp - Diffuser (diffA05 SEP_on):

Diffuser pack with a plain, sloping surface of 5 deg and 3 equidistant separators ('fins').

7. DrivAer_hp - Diffuser (diffA10 SEP_on):

Diffuser pack with a plain, sloping surface of 10 deg and 3 equidistant separators ('fins').

8. DrivAer_hp - Diffuser (diffA16 SEP_on):

Diffuser pack with a plain, sloping surface of 16 deg and 3 equidistant separators ('fins').

CAD files available in IGS, STEP, STL, and Parasolid formats. All geometries are provided in [mm].

Notation:

(diffA) = nominal diffuser angle.

(SEP_on) = use of longitudinal separators ('fins').

-------------------------------------------------

CAD designed and uploaded by:

Renan F Soares - PhD in Aerospace

Applied Aerodynamics Group

Cranfield University, United Kingdom